Built for the Bridge. Ready for Any Forecast.
Get full weather protection and comfort with this tarp specifically engineered for bridge hammocks. Follow this simple step-by-step guide to set up your tarp like a pro.
🔧 What’s in the Package?
Before we start, make sure you have all the components:
Included Accessories:
-
✅ 8× Stretch Prusik Knots (pre-knotted – 23cm, 2.8mm shock cords)
-
✅ 4× 1m Shock Cords (3.2mm)
-
✅ 4× 40cm Shock Cords (3.2mm – pre-attached)
-
✅ 1× 50cm Shock Cord (3.2mm – double-wrapped)
-
✅ 1× 60cm Reflective Shock Cord (2.8mm – with glow toggle)
-
✅ 6× Tent Stakes
-
✅ 2× Tent Guylines
-
✅ 8× Carabiners
-
✅ 1× Suspension Stuff Sack
💡 Tarp Ridgeline not included. Recommended: Onewind Tarp Mini Reel or your own setup.
🏕️ Tarp Setup Instructions
Step 1: Attach the Prusik Knots to Hammock
-
Locate points 1, 2, 3, and 4 on your bridge hammock suspension.
-
Tie or slide the Prusik knots (23cm shock cords) onto these points.
-
These act as anchor points for your tarp corners.
Step 2: Clip the Tarp to Hammock
-
Use carabiners to clip the four corners of the tarp to the Prusik knots you installed in Step 1.
-
This keeps the tarp perfectly aligned and taut above your hammock.
Step 3: Secure the Tarp Ridgeline
-
Use shock cords at points 5 and 6 to connect the tarp to your ridgeline.
-
These cords stabilize the center and keep the tarp from sagging.
Step 4: Anchor the Sides and Ends
-
Stake out the side pull-outs and head/foot ends using:
-
Remaining carabiners
-
Shock cords (40cm, 50cm, 60cm)
-
Tent stakes and guylines
-
-
Adjust the angles for ventilation, visibility, or full enclosure.
🌀 Optional Setup: Large Tarp Mode
Want to enjoy a campfire chat or scenic view?
-
Unfold the extra-wide side panel.
-
Use the included shock cords to attach to tarp poles or trekking poles.
-
Extend outward to create a massive awning-style shelter.
⚠️ Important: Never attach tarp poles directly to the tarp! Always connect through the shock cords to avoid damage.
📏 Why This Tarp Stands Out
-
✅ Optimized for Bridge Hammocks – snug fit, no wasted space.
-
✅ Weather-Adaptable Design – winter protection + summer ventilation.
-
✅ Expandable Side Panel – doubles your sheltered area in seconds.
-
✅ Space-Saving Geometry – reduced weight with full coverage.
-
✅ Elastic Suspension System – maintains distance when hammock sinks.
🧩 Final Tips
-
Always set up with shock cord tension, not direct force.
-
Practice your setup at home to master the steps before the trail.
-
Pair with the Onewind Tarp Mini Reel for fast ridgeline connection.
Now you’re fully equipped. Whether it's rain, wind, or snow—your BridgeShield Tarp is ready for it all. Go out, hang up, and camp smarter.